The RBC5000 is designed to be extremely user friendly and offer excellent power to weight and size ratio. The RBC5000 is over powered; this means you can guarantee the power this unit offers. The RBC5000 provides up to 1600, 2000 or 3000 Peak Amps, it comes in an IP54 case and is capable of working at temperatures from -20?C to +50?C. The RSC5000 is designed specifically for Aircraft and can easily be moved around the hanger. Other variants are available of the RSC5000 and units can be built to specification. Contact our sales or technical team for advice.
These units can be fitted with a Charge Management System that allows the user to charge their customers for the power used whilst an aircraft is connected to a Red Box RBC6000 frequency converter, RBC5000 transformer rectifier unit or and RBSC DC Power Supply. The system is an ideal platform for airport operators who want to pass on the cost of supplying ground power to aircraft on turnaround.
INPUT |
SYSTEM |
Voltage |
380 TO 460VAC, 3-Phase with or without neutral |
Ambient Temperature |
-20 to 50 deg C |
Frequency |
50Hz or 60Hz +/- 6% |
Humidity |
Less than 90% non condensing |
Current Harmonics |
EN61000-3-12 EMC ? Harmonic Limits |
|
All specifications quoted at < 2000m above sea level |
Power Factor |
0.93 |
Acoustic Noise |
Typically 65dB |
Inrush |
Limited to 50A |
Efficiency |
85% to 95% |
Connections |
63 Amp, 10 metre, 5 core cable with BS4343 plug or H/W |
EMC |
EN61000-3-12 EMC ? Harmonic Limits
EN61000-6-2 EMC ? Immunity for Industrial Environments
EN61000-6-4 EMC ? Emission Standards for Industrial Environments |
OUTPUT |
Casing |
Zinc plated steel, powder coated RAL No. BS3020. Size 103cm High x 71cm Wide x 110cm Deep without castors |
Voltage |
28.5V DC |
Case Rating |
IP54 EN60529 - IP Ratings for Enclosures |
Voltage Regulation |
Steady-state: +/-5%, dynamic 0-100% step load: +/-15% recovering to steady-state within 50mS |
Meters |
Analogue readout for output Amps and Volts |
Peak Amps |
600 Amps continuous & 2000 Amps peak |
Panel |
Status lights for input and output conditions, and alarms |
|
|
PROTECTION |
VARIENTS |
Input Protection |
|
Castor Version |
Size 118cm High x 71cm Wide x 110cm Deep |
Thermal Overload |
|
Tow Bar |
1200mm long with 50mm eye (with trailer version only) |
|
|
Stationary Version |
Size 118cm High x 71cm Wide x 110cm Deep |
Options |
Longer input and output cables |
|
|
|
Other variations available on request |
|
|
|
|
|
|
Charge Management System
The Red Box Charge Management System allows the user to charge their customers for the power used whilst an aircraft is connected to a Red Box RBC6000 frequency converter or Red Box RBC5000 transformer rectifier unit. The system is an ideal platform for airport operators who want to pass on the cost of supplying ground power to aircraft on turnaround.
The Red Box CMS is operated via an alphanumeric keyboard attached to the frequency converter or TRU which transmits usage data via an Ethernet connection to the ?back office? and can then produce usage reports and ultimately invoices for individual customers. The data logged includes user ID, i.e. aircraft registration and ground handler I.D., time on and time off. This data is then used in conjunction with a pre-determined charge rate to calculate the cost to the customer. Because this system has been solely created by Red Box it can be adapted to the customer?s specific requirements.
The Red Box CMS is a unique product that enables GPU owners/operators to create a revenue stream from the use of GPU?s by third party customers. The CMS system can be utilized with multiple GPU?s, and run from a single or multiple servers.
CMS Functions
- Access control
- Log usage and activity
- Send ?Power enable? signal to frequency converter/TRU
- Receive ?Power off? from frequency converter/TRU
- Output prompts and messages to user
- Emits usage and activity messages via Ethernet to central server
- Maintain date and time
Back End Functions
- Accepts messages and data from a number of frequency converters/TRU?s
- Writes message activity to SQL database
- Client Application
- Provides authorised interaction with SQL data (screens and reports)
- Backup SQL data
- Enable data extract to Excel spread sheet
For more information contact Red Box to discuss your specific requirements.
|
|
Specification Sheet
|
.
.